Please note that this is an old python submission script for the old cluster at Duke!
#!/usr/bin/env python
import sys,os,time,re,datetime,smtplib
#------fq.py---------------------------
#
# This script is used for performing featquery on a bunch of subjects
#
#########user section#########################
#user specific constants
username = "abc1" #your cluster login name (use what shows up in qstatall)
useremail = "user@email.com" #email to send job notices to
template_f = file("fq_TEMPLATE.sh") #job template location (on head node)
experiment = "NAME.01" #experiment name for qsub
nodes = 24 #number of nodes on cluster
maintain_n_jobs = 25 #leave one in q to keep them moving through
min_jobs = 5 #minimum number of jobs to keep in q even when crowded
n_fake_jobs = 10 #during business hours, pretend there are extra jobs to try and leave a few spots open
sleep_time = 20 #pause time (sec) between job count checks
max_run_time = 720 #maximum time any job is allowed to run in minutes
max_run_hours=24 #maximum number of hours submission script can run
warning_time=18 #send out a warning after this many hours informing you that the deamon is still running
#make job files these are the lists to be traversed
#all iterated items must be in "[ ]" separated by commas.
subnums = ["123","234","235"] #should be entered in quotes, separated by commas, to be used as strings
runs = [1] #[ run01 ] range cuts the last number off any single runs should still be in [ ] or can be runs=range(1,2)
design = "FACES" #the design directory in the Analysis folder
featdesign = "AllOnesNoEyesT1IntermedReg" #the name of the feat design under Analysis/first_level
gfeatdesign = "AllOnes" #the name of the group feat design (ex: "run01" would mean GroupFEAT/run01)
gfeatrun= "LAmyDorsal" #the name of the gfeat run under GroupFEAT/GFEATDESIGN/ so run01 would be GroupFEAT/GFEATDESIGN/run01/run01.gfeat
featrun = "run01" #the name of the feat RUN, run01 would mean - first_level/FEATDESIGN/SUBJECT/run01.feat
#for the above two variables, we don't need the extensions .gfeat or ,feat
copes = "1" #the cope directories we want to extract ROIs for our subjects for!
masks = "1" # the masks that we want to use for each subject in each cope directory.
# NOTE: The script is set up so you can enter ALL masks of interest across all cope
# directories, even if a particular cope doesn't have the mask (it will skip over)
# so be sure to enter ALL masks here!
####!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!###############################################
def daemonize(stdin='/dev/null',stdout='/dev/null',stderr='/dev/null'):
try:
#try first fork
pid=os.fork()
if pid>0:
sys.exit(0)
except OSError, e:
sys.stderr.write("for #1 failed: (%d) %sn" % (e.errno,e.strerror))
sys.exit(1)
os.chdir("/")
os.umask(0)
os.setsid()
try:
#try second fork
pid=os.fork()
if pid>0:
sys.exit(0)
except OSError, e:
sys.stderr.write("for #2 failed: (%d) %sn" % (e.errno, e.strerror))
sys.exit(1)
for f in sys.stdout, sys.stderr: f.flush()
si=file(stdin,'r')
so=file(stdout,'a+')
se=file(stderr,'a+',0)
os.dup2(si.fileno(),sys.stdin.fileno())
os.dup2(so.fileno(),sys.stdout.fileno())
os.dup2(se.fileno(),sys.stderr.fileno())
start_dir = os.getcwd()
daemonize('/dev/null',os.path.join(start_dir,'daemon.log'),os.path.join(start_dir,'daemon.log'))
sys.stdout.close()
os.chdir(start_dir)
temp=time.localtime()
hour,minute,second=temp[3],temp[4],temp[5]
prev_hr=temp[3]
t0=str(hour)+':'+str(minute)+':'+str(second)
log_name=os.path.join(start_dir,'daemon.log')
log=file(log_name,'w')
log.write('Daemon started at %s with pid %dn' %(t0,os.getpid()))
log.write('To kill this process type "kill %s" at the head node command linen' % os.getpid())
log.close()
t0=time.time()
master_clock=0
#build allowed timedelta
kill_time_limit = datetime.timedelta(minutes=max_run_time)
def _check_jobs(username, kill_time_limit, n_fake_jobs):
#careful, looks like all vars are global
#see how many jobs we have in
#set number of jobs to maintain based on time of day.
cur_time = datetime.datetime.now() #get current time #time.localtime() #get current time
if (cur_time.weekday > 4) | (cur_time.hour < 8) | (cur_time.hour > 17):
n_other_jobs = 0
else: #its a weekday, fake an extra 6 jobs to leave 5 nodes open
n_other_jobs = n_fake_jobs
n_jobs = 0
status = os.popen("status -a")
status_list = status.readlines()
for line in status_list:
#are these active or q'd jobs?
if (line.find("Running") > -1):
running = 1
elif (line.find("Waiting") > -1): #all following jobs are in queue not running
running = 0
#if job is mine
if (line.find(username) > 0) & (line.find("interact.q") < 0): #name is in the line, not including first spot
n_jobs = n_jobs + 1
if running == 1: #if active job, check how long its been running and delete it if too long
job_info = line.split() #get job information
start_date = job_info[4].split("/") #split job start date
start_time = job_info[5].split(":") #split time from hours:minutes:seconds format
started = datetime.datetime(int(start_date[2]), int(start_date[0]), int(start_date[1]),
int(start_time[0]), int(start_time[1]), int(start_time[2]))
if ((cur_time - started) > kill_time_limit) & (line.find("stalled") == -1): #if the active job is over max run time, delete it
os.system("qdel %s" % (job_info[0])) #delete the run away job
print("Job %s was deleted because it ran for more than the maximum time." % (job_info[0]))
# if line starts " ###" and isnt an interactive job
elif bool(re.match( "^d+", line )) & (line.find("interact") < 0) & (line.find("(Error)") < 0):
n_other_jobs = n_other_jobs + 1
return n_jobs, n_other_jobs
#make a directory to write job files to and store the start directory
tmp_dir = str(os.getpid())
os.mkdir(tmp_dir)
#read in template
template = template_f.read()
template_f.close()
os.chdir(tmp_dir)
#for each subject
for subnum in subnums:
#for each run
for run in runs:
#Check for changes in user settings
user_settings=("/home/%s/user_settings.txt") % (username)
if os.path.isfile(user_settings):
f=file(user_settings)
settings=f.readlines()
f.close()
for line in settings:
exec(line)
#define substitutions, make them in template
runstr = "%05d" %(run)
tmp_job_file = template.replace( "SUB_USEREMAIL_SUB", useremail )
tmp_job_file = tmp_job_file.replace( "SUB_SUBNUM_SUB", str(subnum) )
tmp_job_file = tmp_job_file.replace( "SUB_DESIGN_SUB", str(design) )
tmp_job_file = tmp_job_file.replace( "SUB_GFEATDESIGN_SUB", str(gfeatdesign) )
tmp_job_file = tmp_job_file.replace( "SUB_FEATDESIGN_SUB", str(featdesign) )
tmp_job_file = tmp_job_file.replace( "SUB_COPES_SUB", str(copes) )
tmp_job_file = tmp_job_file.replace( "SUB_MASKS_SUB", str(masks) )
tmp_job_file = tmp_job_file.replace( "SUB_FEATRUN_SUB", str(featrun) )
tmp_job_file = tmp_job_file.replace( "SUB_GFEATRUN_SUB", str(gfeatrun) )
#make fname and write job file to cwd
tmp_job_fname = "_".join( ["FQ", subnum, runstr ] )
tmp_job_fname = ".".join( [ tmp_job_fname, "job" ] )
tmp_job_f = file( tmp_job_fname, "w" )
tmp_job_f.write(tmp_job_file)
tmp_job_f.close()
#wait to submit the job until we have fewer than maintain in q
n_jobs = maintain_n_jobs
while n_jobs >= maintain_n_jobs:
#count jobs
n_jobs, n_other_jobs = _check_jobs(username, kill_time_limit, n_fake_jobs) #count jobs, delete jobs that are too old
#adjust job submission by how may jobs are submitted
#set to minimum number if all nodes are occupied
#should still try to leave # open on weekdays
if ((n_other_jobs+ n_jobs) > (nodes+1)):
n_jobs = maintain_n_jobs - (min_jobs - n_jobs)
if n_jobs >= maintain_n_jobs:
time.sleep(sleep_time)
elif n_jobs < maintain_n_jobs:
cmd = "qsub -v EXPERIMENT=%s %s" % ( experiment, tmp_job_fname )
dummy, f = os.popen2(cmd)
#Check what how long daemon has been running
t1=time.time()
hour=(t1-t0)/3600
log=file(log_name,'a+')
log.write('Daemon has been running for %s hoursn' % hour)
log.close()
now_hr=time.localtime()[3]
if now_hr>prev_hr:
master_clock=master_clock+1
prev_hr=now_hr
serverURL="email.biac.duke.edu"
if master_clock==warning_time:
headers="From: %srnTo: %srnSubject: Daemon job still running!rnrn" % (useremail,useremail)
text="""Your daemon job has been running for %d hours. It will be killed after %d.
To kill it now, log onto the head node and type kill %d""" % (warning_time,max_run_hours,os.getpid())
message=headers+text
mailServer=smtplib.SMTP(serverURL)
mailServer.sendmail(useremail,useremail,message)
mailServer.quit()
elif master_clock==max_run_hours:
headers="From: %srnTo: %srnSubject: Daemon job killed!rnrn" % (useremail,useremail)
text="Your daemon job has been killed. It has run for the maximum time alotted"
message=headers+text
mailServer=smtplib.SMTP(serverURL)
mailServer.sendmail(useremail,useremail,message)
mailServer.quit()
ID=os.getpid()
os.system('kill '+str(ID))
#wait for jobs to complete
#delete them if they run too long
n_jobs = 1
while n_jobs > 0:
n_jobs, n_other_jobs = _check_jobs(username, kill_time_limit, n_fake_jobs)
time.sleep(sleep_time)
#remove tmp job files move to start dir and delete tmpdir
#terminated jobs will prevent this from executing
#you will then have to clean up a "#####" directory with
# ".job" files written in it.
cmd = "rm *.job"
os.system(cmd)
os.chdir(start_dir)
os.rmdir(tmp_dir)