Please note that this is also an old python submission script that was not updated for the new cluster.
#!/usr/bin/env python
import sys,os,time,re,datetime,smtplib
#------PREPROCESS_FEAT.py---------------------------
#
# This script is used for converting dicom to nifti and correcting orientation for FSL.
# it works with PREPROCESS_FEAT_TEMPLATE.sh to run multiple subjects
#
#########user section#########################
#user specific constants
username = "abc1" #your cluster login name (use what shows up in qstatall)
useremail = "name@email.com" #email to send job notices to
template_f = file("PREPROCESS_FEAT_TEMPLATE.sh") #job template location (on head node)
experiment = "NAME.01" #experiment name for qsub
nodes = 24 #number of nodes on cluster
maintain_n_jobs = 25 #leave one in q to keep them moving through
min_jobs = 5 #minimum number of jobs to keep in q even when crowded
n_fake_jobs = 10 #during business hours, pretend there are extra jobs to try and leave a few spots open
sleep_time = 20 #pause time (sec) between job count checks
max_run_time = 720 #maximum time any job is allowed to run in minutes
max_run_hours=24 #maximum number of hours submission script can run
warning_time=18 #send out a warning after this many hours informing you that the deamon is still running
#make job files these are the lists to be traversed
#all iterated items must be in "[ ]" separated by commas.
#experiment variables
subnums = ["11111111_22222"] #should be entered in quotes, separated by commas, to be used as strings
runs = [1] #[ run01 ] range cuts the last number off any single runs should still be in [ ] or can be runs=range(1,2)
anatfolder = "series002" #this is the folder under Data/Anat that includes the BET folder with the anatomical
anatfile = "anat_brain" # this is the name to give the brain extraction (convention is "anat_brain")
funcfolder = "run004_03" #this is the name of the folder to convert
volume = "195" #This is the image number at the end of the functional run that must be deleted MINUS one. MUST be in the format "012"
# If you want to delete "172" for example, specify "171" as the count starts at 0
#if there are no images to be deleted, enter a value of "0"
#(the scanner must have an even number of images, and some tasks have an odd number of timepoints)
betvalue = ".225" #This is the threshold that you want to use for the brain extraction
design = "Block" #This specifies if the Design is Block, Event, or another type
task = "TASK" #This is the name of the task under Analysis
order ="1" #This is the order that the above task was run with. If there is just one order, put "1"
# processing choices
anatpre ="no" #Put "yes" if you want to preprocess anatomical directory, "no" if not
funcpre = "yes" #Put "yes" if you want to preprocess the functional data and create nifti headers. "no" if not
featrun = "no" #Put "yes" if you want to run first level FEAT
####!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!###############################################
def daemonize(stdin='/dev/null',stdout='/dev/null',stderr='/dev/null'):
try:
#try first fork
pid=os.fork()
if pid>0:
sys.exit(0)
except OSError, e:
sys.stderr.write("for #1 failed: (%d) %s\n" % (e.errno,e.strerror))
sys.exit(1)
os.chdir("/")
os.umask(0)
os.setsid()
try:
#try second fork
pid=os.fork()
if pid>0:
sys.exit(0)
except OSError, e:
sys.stderr.write("for #2 failed: (%d) %s\n" % (e.errno, e.strerror))
sys.exit(1)
for f in sys.stdout, sys.stderr: f.flush()
si=file(stdin,'r')
so=file(stdout,'a+')
se=file(stderr,'a+',0)
os.dup2(si.fileno(),sys.stdin.fileno())
os.dup2(so.fileno(),sys.stdout.fileno())
os.dup2(se.fileno(),sys.stderr.fileno())
start_dir = os.getcwd()
daemonize('/dev/null',os.path.join(start_dir,'daemon.log'),os.path.join(start_dir,'daemon.log'))
sys.stdout.close()
os.chdir(start_dir)
temp=time.localtime()
hour,minute,second=temp[3],temp[4],temp[5]
prev_hr=temp[3]
t0=str(hour)+':'+str(minute)+':'+str(second)
log_name=os.path.join(start_dir,'daemon.log')
log=file(log_name,'w')
log.write('Daemon started at %s with pid %d\n' %(t0,os.getpid()))
log.write('To kill this process type "kill %s" at the head node command line\n' % os.getpid())
log.close()
t0=time.time()
master_clock=0
#build allowed timedelta
kill_time_limit = datetime.timedelta(minutes=max_run_time)
def _check_jobs(username, kill_time_limit, n_fake_jobs):
#careful, looks like all vars are global
#see how many jobs we have in
#set number of jobs to maintain based on time of day.
cur_time = datetime.datetime.now() #get current time #time.localtime() #get current time
if (cur_time.weekday > 4) | (cur_time.hour < 8) | (cur_time.hour > 17):
n_other_jobs = 0
else: #its a weekday, fake an extra 6 jobs to leave 5 nodes open
n_other_jobs = n_fake_jobs
n_jobs = 0
status = os.popen("status -a")
status_list = status.readlines()
for line in status_list:
#are these active or q'd jobs?
if (line.find("Running") > -1):
running = 1
elif (line.find("Waiting") > -1): #all following jobs are in queue not running
running = 0
#if job is mine
if (line.find(username) > 0) & (line.find("interact.q") < 0): #name is in the line, not including first spot
n_jobs = n_jobs + 1
if running == 1: #if active job, check how long its been running and delete it if too long
job_info = line.split() #get job information
start_date = job_info[4].split("/") #split job start date
start_time = job_info[5].split(":") #split time from hours:minutes:seconds format
started = datetime.datetime(int(start_date[2]), int(start_date[0]), int(start_date[1]),
int(start_time[0]), int(start_time[1]), int(start_time[2]))
if ((cur_time - started) > kill_time_limit) & (line.find("stalled") == -1): #if the active job is over max run time, delete it
os.system("qdel %s" % (job_info[0])) #delete the run away job
print("Job %s was deleted because it ran for more than the maximum time." % (job_info[0]))
# if line starts " ###" and isnt an interactive job
elif bool(re.match( "^\d+", line )) & (line.find("interact") < 0) & (line.find("(Error)") < 0):
n_other_jobs = n_other_jobs + 1
return n_jobs, n_other_jobs
#make a directory to write job files to and store the start directory
tmp_dir = str(os.getpid())
os.mkdir(tmp_dir)
#read in template
template = template_f.read()
template_f.close()
os.chdir(tmp_dir)
#for each subject
for subnum in subnums:
#for each run
for run in runs:
#Check for changes in user settings
user_settings=("/home/%s/user_settings.txt") % (username)
if os.path.isfile(user_settings):
f=file(user_settings)
settings=f.readlines()
f.close()
for line in settings:
exec(line)
#define substitutions, make them in template
runstr = "%05d" %(run)
tmp_job_file = template.replace( "SUB_USEREMAIL_SUB", useremail )
tmp_job_file = tmp_job_file.replace( "SUB_SUBNUM_SUB", str(subnum) )
tmp_job_file = tmp_job_file.replace( "SUB_ANATFOLDER_SUB", str(anatfolder) )
tmp_job_file = tmp_job_file.replace( "SUB_ANATFILE_SUB", str(anatfile) )
tmp_job_file = tmp_job_file.replace( "SUB_FUNCFOLDER_SUB", str(funcfolder) )
tmp_job_file = tmp_job_file.replace( "SUB_VOLUME_SUB", str(volume) )
tmp_job_file = tmp_job_file.replace( "SUB_BETVALUE_SUB", str(betvalue) )
tmp_job_file = tmp_job_file.replace( "SUB_RUNNAME_SUB", str(run) )
tmp_job_file = tmp_job_file.replace( "SUB_DESIGN_SUB", str(design) )
tmp_job_file = tmp_job_file.replace( "SUB_TASK_SUB", str(task) )
tmp_job_file = tmp_job_file.replace( "SUB_ORDER_SUB", str(order) )
tmp_job_file = tmp_job_file.replace( "SUB_ANATPRE_SUB", str(anatpre) )
tmp_job_file = tmp_job_file.replace( "SUB_FUNCPRE_SUB", str(funcpre) )
tmp_job_file = tmp_job_file.replace( "SUB_FEATRUN_SUB", str(featrun) )
#make fname and write job file to cwd
tmp_job_fname = "_".join( ["PREPROCESS_FEAT", subnum, runstr ] )
tmp_job_fname = ".".join( [ tmp_job_fname, "job" ] )
tmp_job_f = file( tmp_job_fname, "w" )
tmp_job_f.write(tmp_job_file)
tmp_job_f.close()
#wait to submit the job until we have fewer than maintain in q
n_jobs = maintain_n_jobs
while n_jobs >= maintain_n_jobs:
#count jobs
n_jobs, n_other_jobs = _check_jobs(username, kill_time_limit, n_fake_jobs) #count jobs, delete jobs that are too old
#adjust job submission by how may jobs are submitted
#set to minimum number if all nodes are occupied
#should still try to leave # open on weekdays
if ((n_other_jobs+ n_jobs) > (nodes+1)):
n_jobs = maintain_n_jobs - (min_jobs - n_jobs)
if n_jobs >= maintain_n_jobs:
time.sleep(sleep_time)
elif n_jobs < maintain_n_jobs:
cmd = "qsub -v EXPERIMENT=%s %s" % ( experiment, tmp_job_fname )
dummy, f = os.popen2(cmd)
#Check what how long daemon has been running
t1=time.time()
hour=(t1-t0)/3600
log=file(log_name,'a+')
log.write('Daemon has been running for %s hours\n' % hour)
log.close()
now_hr=time.localtime()[3]
if now_hr>prev_hr:
master_clock=master_clock+1
prev_hr=now_hr
serverURL="email.biac.duke.edu"
if master_clock==warning_time:
headers="From: %s\r\nTo: %s\r\nSubject: Daemon job still running!\r\n\r\n" % (useremail,useremail)
text="""Your daemon job has been running for %d hours. It will be killed after %d.
To kill it now, log onto the head node and type kill %d""" % (warning_time,max_run_hours,os.getpid())
message=headers+text
mailServer=smtplib.SMTP(serverURL)
mailServer.sendmail(useremail,useremail,message)
mailServer.quit()
elif master_clock==max_run_hours:
headers="From: %s\r\nTo: %s\r\nSubject: Daemon job killed!\r\n\r\n" % (useremail,useremail)
text="Your daemon job has been killed. It has run for the maximum time alotted"
message=headers+text
mailServer=smtplib.SMTP(serverURL)
mailServer.sendmail(useremail,useremail,message)
mailServer.quit()
ID=os.getpid()
os.system('kill '+str(ID))
#wait for jobs to complete
#delete them if they run too long
n_jobs = 1
while n_jobs > 0:
n_jobs, n_other_jobs = _check_jobs(username, kill_time_limit, n_fake_jobs)
time.sleep(sleep_time)
#remove tmp job files move to start dir and delete tmpdir
#terminated jobs will prevent this from executing
#you will then have to clean up a "#####" directory with
# ".job" files written in it.
cmd = "rm *.job"
os.system(cmd)
os.chdir(start_dir)
os.rmdir(tmp_dir)